IDRLEXT18 - 18" Extension
K-Drill 18" AUger Extension
The standard K-Drill can auger through up to 36" of ice. So when things get a bit more challenging than that, an extension can be added for ice conditions beyond three feet. The extensions can also be "stacked" if needed to create a very long ice auger.
How to Install
Slide the K-Drill’s float down, exposing the Allen bolt.
Remove the bolt and remove the drive stem and washer.
Install the stem of extension into the open shaft of the K-Drill, securing extension to K-Drill.
Replace and tighten the bolt removed in step #2.
Install the drive stem with washer into the top of extension.
Secure it with the new bolt provided.
NOTE: You will notice that the extension also has a float attached. This is to account for the added weight. Do not remove this second float.