RIGblaster PWRcheck+





58430-1564
PWRcheck+
Key Features
Hardware
Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours |
Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck+), 40A continuous load |
Accurate to within +/- 10mV, +/- 10mA |
Resolution - 10mV, 10mA |
High side monitoring does not require breaking power supply ground or return path, ideal for vehicle use |
Vibrant LCD color touchscreen displays data in digital, analog and bar graph formats |
Monitor back up battery with programmable gas gauge |
Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months worth of data @ 1 point per minute) without power |
USB computer interface for configuration and data download |
Programmable alarm conditions for overcurrent, over/under voltage, amp-hours |
Uses Powerpole® connectors (see Accessories) |
Software
Easily program every aspect of PWRcheck+ operation such as data logging rate, display formats, alarm conditions |
Displays current, voltage, wattage and amp-hours in real time |
Integrated charting software automatically collects and displays data |
Downloads stored data for later analysis |
Exports to Excel |
Computer System Requirements
At least an 800 X 600 graphics card and display monitor |
Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10 |
An available USB port |
Specifications
General
Dimensions
0.875" H x 4.5" W x 3" D
Input Voltage
Without USB - 7 V (Minimum) / 60 V (Maximum)
With USB - 0 V (minimum) / 60 V (Maximum)
Input Current
With & Without USB - 0 A (Minimum) / 40 A (Maximum)
Input Current Used By PWRcheck+
Without USB - 0 A (Minimum) / 0.120 A (Maximum)
With USB - 0 A (Minimum) / 0 A (Maximum)
In The Box
-
PWRcheck+ - integrated DC power analyzer, watt meter and electricity monitor
-
PWRcheck software, Version 1.52
-
Micro USB cable
-
2 pair Red and Black Powerpole® with 30A contacts
-
Owner's Manual