Canadian-owned and operated since 1999. Join us May 31 for our General
Integrates with any transceiver.
Designed to complement the FLEX-6000 series transceivers and Power Genius XL™ amplifier.
Seamless SmartSDR™ software integration.
Complete control and monitoring (over LAN) from an intuitive Windows™ application.
High accuracy SWR and power meter measurements in bypass mode…and much more.
Tuner
Tuning
Fully automatic and manually tuned operation
Frequency Range
1.8 to 54 MHz continuous
Radio Interface
Works with all radios using Flex radio LAN, RS232, CI-V, BCD, Pin-to-Band (PTB), or use the built in frequency counter
Alarms and Warnings
Low drive, Frequency Out of Range, Wrong band, and High power
Matching Range
Up to 10:1 SWR. Resonant antenna frequency range memories will bypass the tuner automatically
Tuning Time
Tuning solutions (2 to 12 seconds) are stored in memory automatically. Stored memory switching is 20ms
Tuning Power Requirement
10W – 200W
User Interface
Display
Large 4.5” color touch screen display
Interface
Front panel controls for manual switching, tuning & configuration
System
Windows™ utility application for over the network control and configuration
RF Characteristics
Nominal Impedance
50-Ohm unbalanced
Nominal Operating Power
Up to 2000W
Duty Cycle
100% ICAS
Protection
Intelligent SWR and power derating
Inputs and Outputs
1×3 matrix (1 in, 3 out)
Switching
Matrix, manual or automatic by frequency / band
Mechanical / Electrical
Power Supply
12 – 16V DC @2A
Dimensions
11.8” W x 13.8” D x 5.9” H (30cm W x 35cm D x 15cm H)
Weight
15.4 lbs (7kg)
Environmental
Temperature Range
-4F (-20C) to +122F (+50 C)
Humidity
Up to 98 percent (non-condensing)
Altitude (ASL)
Up to 10,000 feet (3,050m)