General
Frequency coverage
136–174 MHz (NXDN/dPMR)
Number of channels
16
Type of emission
11K0F3E, 4K00F1E, 4K00F1D (USA)
Dimensions
52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280)
Power supply requirement
7.5V DC nominal
Current drain (approx.)
Tx 1.3A
Rx 520 mA /110 mA (Max. audio (internal SP)/Standby)
Antenna impedance
50Ω
Operating temperature range
–30°C ~ +60°C; –22°F ~ +140°F (Radio specification) (USA/EXP)
Transmitter
Output power (Hi, L2, L1)
5 W, 2 W, 1 W
Max. frequency deviation
± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz)
Spurious emissions
70 dB minimum (USA/EXP) (350–400 MHz is included)
Frequency stability
±2.0 ppm
Audio harmonic distortion
0.8% typ. (25 kHz),
0.9% typical (20 kHz),
1.0% typical (12.5 kHz)
(at AF 1 kHz 40% deviation)
FM Hum and Noise (without CCITT filter)
44 dB typ. (12.5 kHz) (USA/EXP)
Residual modulations (with CCITT filter)
51 dB typical (25 kHz),
49 dB typical (20 kHz)
FSK error
5% maximum
External microphone connector
3-conductor 2.5 (d) mm (1/10 in)/2.2 kΩ
Receiver
Sensitivity
Analog (at 12dB SINAD) 0.24 μV typical
Analog (at 20dB SINAD) –5 dBμV typ. emf (25/20 kHz)
Analog (at 20dB SINAD) –2 dBμV typ. emf (12.5 kHz)
Digital (at 5% BER) –9 dBμV typical emf (0.18 μV typical)
Adjacent channel selectivity
77 dB typ. (25 kHz),
75 dB typ. (20 kHz),
67 dB typ. (12.5 kHz),
59 dB typ. (digital)
Spurious rejection
80 dB typical
Intermodulation rejection
Digital 71 dB typ. (USA/EXP),
Analog 75 dB typ. (12.5 kHz, USA/EXP),
Hum and noise
(With CCITT filter) 43 dB typ. (12.5 kHz, USA/EXP)
(Without CCITT filter) 51 dB typ. (25 kHz),
49 dB typ. (20 kHz),
46 dB typ. (12.5 kHz)
AF output power (at 5% distortion 8Ω load)
Internal SP 1500 mW typical
External SP 450 mW typical (single end),
1500 mW typical (BTL, HM-222HLWP connected*)
External speaker connector
2-conductor 3.5 (d) mm (1⁄8 in)/8 Ω