General
Position Tracking
Use Ray90’s position tracking feature to keep tabs on up to 5 nearby DSC equipped vessels. Their positions are automatically shared with your Raymarine MFD. Keep an eye on other boats in your cruising party, monitor vessels of interest, or manage your local fleet. In Europe the Ray90 supports the ATIS system on navigable inland waterways.
Loudhailer
Ray90’s built-in loudhailer will make you heard on-deck and across the harbour. Connect an optional hailing horn and make your presence known with 30-watts of audio output, plus 2-way talkback. When things get foggy, the loudhailer can also be set to automatically sound required fog signals for power and sailing vessels underway and at anchor.
Waterproof & Ruggedized
Ray90’s transceiver unit is cast in solid aluminum for shock and vibration resistance and maximum heat dissipation. RayMic handsets feature super-bright backlighting for easy viewing in all conditions and oversized keys provide a sure grip with easy access to commonly used functions.
Expand Your System
The Ray90 system includes 1 RayMic wired handset and a passive speaker kit. Expand your system with an additional RayMic handset and remote speaker. For noisy environments choose the optional active remote speaker. No matter how small or how large your vessel is, the Ray90 all the power and performance you need for essential communications on the water.
General
Size Main Unit (HxWxD)
63mm (2.48 in) x 235mm (9.25 in) max x 160mm (6.30 in) max excl rear cables
Weight Main Unit
2.6 Kg (5.7 lbs)
Water Integrity
Complies with IPX6 & IPX7 & EN60945
Operating Temperature Range
-25°C to 55°C
Storage Temperature Range
-25°C to 70°C
Humidity
Up to 95%
Communications Port
NMEA 0183 (version 4.01); NMEA2000 (version 3.101)
Nominal Supply Voltage
12V DC. Reverse polarity and over voltage protected
Operating Voltage Range
9V DC to 16V DC
Current Consumption
Less than 6A at High Power (13.6V)
Standby: 600 mA
Receive: 2 Amps
External Passive Speaker Power
5W (4Ω) / 2.5W (8Ω) (Passive)
Hailer Speaker Power Output
24W (4Ω) / 12W (8Ω)
Transmitter
Channels
All available US, International and Canadian VHF marine bands
Frequency Range
156.000 – 157.425 MHz
155.500 to 161.425 MHz Private channels
Frequency Stability
+ / - 1.5 ppm
Channel Spacing
12.5 kHz
Power Output
High Power = 25 Watt
Low Power = 1 Watt
Spurious Emmission
Better than -36 dBm at 25W (Less than 0.25 µW)
Maximum Deviation
+/- 5kHz
Antenna Port Impedance
50 ohms typical
Receiver
Receiver Type
Double Conversion Super Heterodyne
Channels
All available US, International and Canadian VHF marine bands
Frequency Range
156.000 – 157.425 MHz
155.500 to 161.425 MHz Private channels
Stability
Better than 1 microvolt EMF @ 20dB SINAD
Squelch Sensitivity
Less than -2 dBµ EMF
Hum & Noise
Better than -40 dB
Audio Distortion
Less than 10%
Receiver Sensitivity
Distance -119 dBm (0.25uV)@12 dB SINAD ← Typical
Local -110 dBm (0.7uV)@12 dB SINAD ← Typical
Adjacent Channel Selectivity
More than 70 dB
Spurious Response Rejection
More than 70 dB
Inter Modulation Rejection
More than 70 dB
GPS
Number Of Channels
72
Cols Start
29s
Receiver IC Sensitivity
-167 dBm (Tracking) / -148 dBM (Acquisition)
GNSS Compatibility
GPS, GLONASS, *BeiDou
SBAS Compatibility
WAAS, EGNOS, MSAS
Special Features
Active jamming and interference reduction
Operating Frequencies
GPS L1 C/A
GLONASS L10F
Beidou B1
Signal Acquisition
Automatic
Almanac Update
Automatic
Geodetic Datum
WGS-84 (alternatives available through Raymarine MFD)
Refresh Rate
20 Hz (20 times per second concurrent GNSS)
Positional Accuracy
Without SBAS: less than 2.5 metres 95% of the time
With SBAS: less than 2 metres 95% of the time
-
Ray90 VHF DSC Radio (including fitted power and data cable)
-
Raymic handset cradle
-
Raymic handset
-
Raymic handset adaptor cable (12 pin female to 12 pin male with RCA Audio)
-
Passive speaker
-
Passive speaker mounting gasket
-
Passive speaker mounting screws x 4
-
VHF radio mounting screws x 4
-
Documentation
-
Handset cradle mounting screws x 4
-
DeviceNet to SeaTalkng® adaptor
-
AIS700